Enduro Shine

A solvent-based tire dressing uses a chemical solvent to carry silicone agents deep into rubber surfaces, delivering a bold wet-look shine that dries quickly and lasts longer than water-based alternatives. Enduro Shine is a solvent-based formula that produces a high-gloss finish and resists washing off on contact with water. Water-based dressings use water as the carrier, dry more slowly, and typically produce a less extreme shine.

Sling happens when excess tire dressing is not fully absorbed or dried before the vehicle is driven. To prevent sling with Enduro Shine, allow the product to dry completely for 5–10 minutes after application before driving. Avoid excessive buildup on the tire sidewall. When applied correctly, with even coverage and proper dry time, Enduro Shine is formulated to stay on the tire surface rather than sling onto body panels.

Clean the tires first using a degreaser like Glory to remove dirt, grime, and old dressing residue. Allow tires to dry completely. Apply Enduro Shine by sprayer for a wet-look finish without wiping, or spread evenly with an applicator pad for more controlled coverage. Allow 5–10 minutes to dry before driving. For a deeper gloss, apply a second coat after the first dries. Avoid applying to the tire tread area.

Solvent-based tire dressings like Enduro Shine generally last longer than water-based formulas because the solvent carries silicone deep into the rubber surface rather than sitting on top. Durability depends on weather exposure, driving conditions, and how thoroughly tires were cleaned before application. Washing tires with a degreaser before each application significantly improves adhesion and extends results between applications.

Yes. Enduro Shine is suitable for use on all rubber tire types including car tires, truck tires, commercial fleet vehicle tires, and trailer tires. Apply to clean, dry tire sidewalls only, avoid applying to the tread area where the tire contacts the road surface, as this can affect traction. For best results, clean tires thoroughly before every application and allow adequate drying time before operating the vehicle.